As an Amazon Associate, we earn from qualifying purchases. Some links may be affiliate links at no extra cost to you. Although our opinions are based on curated research, we haven't used these products. Articles generated with AI.
10 Best Outdoor Speaker Wire That Keeps the Music Cracking Loud
You’ll want CL2‑rated, UV‑resistant wire like Satmaximum 14/2 500 ft, which uses 14 AWG copper‑clad aluminum to keep resistance low over long runs, so your patio music stays loud and clear. Choose Skar Audio’s 14 AWG marine‑grade for salty‑air durability, or SYSTON 16/2 for flexible OFC copper in a fire‑rated jacket. Amazon Basics 16‑gauge gives a cheap, polarity‑marked option, while Elite 16/2 adds UL‑listed, ripcord‑easy installation. All these keep voltage drop minimal, resist cracking, and survive burial—keep reading to see why each tops the list.
Key Takeaways
- Choose CL2‑rated or higher jackets (e.g., CL3, CMR) with UV‑resistant LLDPE to prevent sun‑induced cracking and maintain conductivity outdoors.
- Prefer 14 AWG or lower gauge (12 AWG) conductors for long runs; lower resistance keeps voltage drop under 3 % and avoids audio distortion.
- Use oxygen‑free copper (OFC) or high‑quality copper‑clad aluminum (CCA) strands; OFC offers the lowest resistance for loud, clean sound.
- Ensure clear polarity marking (red/black or red/white) and color‑coded conductors to prevent phase reversal and preserve stereo imaging.
- Opt for flexible, stranded designs with direct‑burial ratings (CL2/CL3) and waterproof insulation for easy routing and reliable performance in patio, marine, or buried installations.
| Satmaximum 14/2 500FT Outdoor Speaker Wire (CL2) |  | Budget-Friendly Pick | Gauge: 14 AWG | Length: 500 ft | Conductors Material: Copper‑Clad Aluminum (CCA) | VIEW LATEST PRICE | Read Our Analysis |
| Skar Audio 14AWG Marine Grade Speaker Wire (100ft) |  | Marine Grade | Gauge: 14 AWG | Length: 100 ft | Conductors Material: Oxygen‑Free Copper (OFC) – tinned | VIEW LATEST PRICE | Read Our Analysis |
| SYSTON 16/2 Speaker Audio Cable 100 FT White |  | Premium OFC | Gauge: 16 AWG | Length: 100 ft | Conductors Material: Oxygen‑Free Copper (OFC) | VIEW LATEST PRICE | Read Our Analysis |
| Amazon Basics 16-Gauge Speaker Wire Cable Polarity Marked 100 ft Bronze |  | Everyday Essential | Gauge: 16 AWG | Length: 100 ft | Conductors Material: Plastic‑jacketed copper (standard) | VIEW LATEST PRICE | Read Our Analysis |
| Elite 16/2 Speaker Wire 100ft OFC Copper UL Listed | UL Certified | Gauge: 16 AWG | Length: 100 ft | Conductors Material: 100 % Oxygen‑Free Copper (OFC) | VIEW LATEST PRICE | Read Our Analysis | |
| 12 Gauge 100ft Speaker Wire OFC Marine Rated |  | Heavy‑Duty | Gauge: 12 AWG | Length: 100 ft | Conductors Material: Oxygen‑Free Copper (OFC) | VIEW LATEST PRICE | Read Our Analysis |
| GEARit Outdoor CL3 Rated Speaker Wire 16 Gauge 250 ft (Black 2‑Conductors) |  | Long‑Run Specialist | Gauge: 16 AWG | Length: 250 ft | Conductors Material: Oxygen‑Free Copper (OFC) | VIEW LATEST PRICE | Read Our Analysis |
| InstallGear 12AW Speaker Wire – 30ft Brown OFC Cable |  | Compact Power | Gauge: 12 AWG | Length: 30 ft | Conductors Material: Oxygen‑Free Copper (OFC) | VIEW LATEST PRICE | Read Our Analysis |
| FIRMERST 16/4 Outdoor Speaker Wire 100FT |  | Shielded Performance | Gauge: 16 AWG (4‑conductor) | Length: 100 ft | Conductors Material: Oxygen‑Free Copper (OFC) | VIEW LATEST PRICE | Read Our Analysis |
| AWG Outdoor Speaker Wire 14/4 Gauge 50FT UV-Resistant CL2 Burial Cable |  Multi‑Color Convenience | Gauge: 14 AWG (4‑conductor) | Length: 50 ft | Conductors Material: Copper‑Clad Aluminum (CCA) | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Satmaximum 14/2 500FT Outdoor Speaker Wire (CL2)
If you’re wiring a backyard patio or a whole‑house audio system and you need a cable that won’t turn your music into static, the Satmaximum 14/2 500 ft outdoor speaker wire is the go‑to choice. Its 14 AWG copper‑clad aluminum conductors carry higher power without loss, so your amp can push the volume and still sound clean across 500 feet. The stranded design stays flexible, making trenching or indoor routing painless, while the CL2‑rated, UV‑resistant jacket survives sun, rain, and direct burial. The built‑in stripe marks polarity, so you’ll never swap hot and ground by mistake. We 12.62‑lb spool fits snugly in a 11 × 11 × 8‑inch box, and you can pick black or red to match décor. Connect a single run from receiver to in‑wall controls, and you’ll get crisp, distortion‑free sound for patio speakers, whole‑house zones, or even low‑voltage LED lighting.
- Gauge:14 AWG
- Length:500 ft
- Conductors Material:Copper‑Clad Aluminum (CCA)
- Rating (In‑Wall/Direct‑Burial):CL2 (direct burial, UV resistant)
- Number of Conductors:2‑conductor
- Color / Marking:Black (stripe for polarity)
- Additional Feature:Bulk 500‑ft spool
- Additional Feature:UV‑resistant jacket
- Additional Feature:Polarity stripe marking
Skar Audio 14AWG Marine Grade Speaker Wire (100ft)
Skar Audio’s 14‑gauge marine‑grade speaker wire is the go‑to choice for anyone who rigs a boat, a truck, or an outdoor patio and refuses to tolerate crackle‑filled music. You’ll appreciate its 99.99 % oxygen‑free copper core, which keeps resistance low and sound clean, while the tinned conductors fend off salt‑air corrosion, so you won’t be rewiring after a rainstorm. The 42‑strand, 0.25 mm construction gives it flexibility, letting you snake the cable through tight conduit or under a deck without kinking, and the 100‑ft continuous length means you can reach distant speakers without splicing. Its rugged insulation resists vibration and long‑term exposure, so the wire stays intact on a rocking boat or a bumpy truck, and at 6.41 lb it’s hefty enough to feel solid yet light enough to handle. In short, you get maximum signal transfer, durability, and ease of installation in one black, marine‑grade package.
- Gauge:14 AWG
- Length:100 ft
- Conductors Material:Oxygen‑Free Copper (OFC) – tinned
- Rating (In‑Wall/Direct‑Burial):Marine‑grade, outdoor‑rated
- Number of Conductors:2‑conductor
- Color / Marking:Black
- Additional Feature:Tinned copper conductors
- Additional Feature:42‑strand flexibility
- Additional Feature:Marine‑grade corrosion resistance
SYSTON 16/2 Speaker Audio Cable 100 FT White
The SYSTON 16/2 Speaker Audio Cable, 100 ft in white, is the go‑to wire for anyone who wants outdoor sound that stays loud and clear without the dreaded crackle. Its 16 AWG stranded OFC conductors give you premium oxygen‑free copper, which means lower resistance and less signal loss, so your music stays vibrant across the full length. The CMR riser‑rated jacket resists UV and fire, letting you run it through sun‑baked patios or under decks without worrying about degradation. Flexible strands stop tangles, making it easy to pull and connect with banana plugs, spade connectors, or bare wire, while RoHS compliance assures it’s environmentally safe for home theater, car audio, or PA setups.
- Gauge:16 AWG
- Length:100 ft
- Conductors Material:Oxygen‑Free Copper (OFC)
- Rating (In‑Wall/Direct‑Burial):CMR (indoor/outdoor, UV resistant)
- Number of Conductors:2‑conductor
- Color / Marking:White
- Additional Feature:RoHS compliant
- Additional Feature:CMR riser‑rated
- Additional Feature:White UV‑resistant color
Amazon Basics 16-Gauge Speaker Wire Cable Polarity Marked 100 ft Bronze
Outdoor enthusiasts who need a reliable link between their patio amp and garden speakers will love the Amazon Basics 16‑Gauge Speaker Wire, because its 100‑foot bronze‑colored cable delivers clear, undistorted sound while standing up to the elements. You’ll notice the 16‑gauge gauge means low resistance, so even long runs keep volume strong, and the plastic jacket protects against moisture and UV, so the wire won’t crack in rain. The black line marking shows polarity instantly, preventing phase‑reversal mishaps during setup, and the two‑strand, two‑wire design simplifies wiring to any A/V receiver or amp. The hard‑plastic spool lets you unwind smoothly, saving time and avoiding tangled messes, while the 1.65‑pound weight keeps the spool portable for on‑site installations.
- Gauge:16 AWG
- Length:100 ft
- Conductors Material:Plastic‑jacketed copper (standard)
- Rating (In‑Wall/Direct‑Burial):Not specified (general indoor/outdoor)
- Number of Conductors:2‑conductor
- Color / Marking:Bronze
- Additional Feature:Hard plastic spool
- Additional Feature:Bronze‑colored jacket
- Additional Feature:Polarity line marking
Elite 16/2 Speaker Wire 100ft OFC Copper UL Listed
If you’re wiring a backyard patio or a garden‑stage system and need a cable that won’t turn your music into static, the Elite 16/2 Speaker Wire 100 ft is the go‑to choice. Its 100 % oxygen‑free pure copper conductors, 16 AWG gauge, and 65 strands per conductor lower resistance, so you hear louder, clearer sound with minimal loss even over long runs. The white PVC jacket is UV‑protected and ultra‑flexible, letting you run it in‑wall, outdoor, or directly buried without cracking, while the ripcord makes stripping a breeze. UL listed, RoHS compliant, and rated CMR/CL3R, it meets safety codes for indoor and outdoor installations, and the color‑coded conductors keep polarity straight. At 100 ft, 3.76 lb, and packaged in a compact 7.87 × 7.83 × 3.54 in box, you get a durable, premium‑grade cable that outperforms cheaper CCA alternatives and keeps your music cracking loud.
- Gauge:16 AWG
- Length:100 ft
- Conductors Material:100 % Oxygen‑Free Copper (OFC)
- Rating (In‑Wall/Direct‑Burial):CMR/CL3R (in‑wall & direct burial)
- Number of Conductors:2‑conductor
- Color / Marking:White
- Additional Feature:UL listed safety
- Additional Feature:Ripcord easy stripping
- Additional Feature:Ultra‑flexible PVC jacket
12 Gauge 100ft Speaker Wire OFC Marine Rated
Looking for a wire that won’t let your outdoor sound system sputter when the bass hits? The KeyLine 12‑Gauge, 100‑ft OFC marine‑rated speaker cable delivers 180‑strand stranded copper, so you get efficient power transfer and low resistance, meaning your subwoofer stays punchy even at high volume. Its UL CL3 rating lets you bury it directly outdoors or run it in‑wall safely, protecting against moisture and UV, while the black jacket blends with any setup. Two conductors, true 12 AWG, handle home‑theater, car audio, trailer, and marine applications without signal loss. At roughly 10 lb and 100 ft, it’s sturdy yet manageable, and the warranty backs its durability for long‑term outdoor use.
- Gauge:12 AWG
- Length:100 ft
- Conductors Material:Oxygen‑Free Copper (OFC)
- Rating (In‑Wall/Direct‑Burial):CL3 (direct burial, in‑wall)
- Number of Conductors:2‑conductor
- Color / Marking:Black
- Additional Feature:180‑strand construction
- Additional Feature:CL3 direct‑burial rating
- Additional Feature:Heavy‑duty vibration resistance
GEARit Outdoor CL3 Rated Speaker Wire 16 Gauge 250 ft (Black 2‑Conductors)
The 16‑gauge, 250‑foot length of GEARit’s CL3‑rated speaker wire makes it the go‑to choice for anyone who needs a long, reliable run from a backyard amp to patio or garden speakers without sacrificing sound quality. You’ll appreciate the oxygen‑free copper core, 65 strands of 16‑gauge conductors that keep signal loss ultra‑low, so your music stays crisp even at the farthest speaker. The CL3 rating lets you bury it directly in the ground or run it inside walls, and the flexible black jacket resists moisture and UV, meaning you won’t need a professional installer. Polarity markings and foot‑by‑foot labels speed up setup, and the 2‑conductor design works with banana plugs, spade tips, and most amplifiers, giving you a tidy, powerful audio system for BBQs, pool parties, or backyard movie nights.
- Gauge:16 AWG
- Length:250 ft
- Conductors Material:Oxygen‑Free Copper (OFC)
- Rating (In‑Wall/Direct‑Burial):CL3 (direct burial, in‑wall)
- Number of Conductors:2‑conductor
- Color / Marking:Black (polarity markings)
- Additional Feature:250‑ft length for long runs
- Additional Feature:Foot‑by‑foot polarity markings
- Additional Feature:Flexible jacket for easy routing
InstallGear 12AW Speaker Wire – 30ft Brown OFC Cable
You’re setting up outdoor speakers and need a cable that won’t turn your music into static, so the InstallGear 12‑AWG speaker wire—30 feet of brown OFC cable—hits the sweet spot. Its 12‑gauge, multi‑strand copper conductor lowers resistance, so you hear clear, punchy sound even at the far end of a patio. The oxygen‑free construction (OFC) cuts signal loss, letting you run the full 30 ft without noticeable drop‑off. A flexible PVC jacket protects against moisture and UV, making outdoor installation a breeze and keeping the wire from cracking under weather stress. Weighing just 1.56 lb, it’s lightweight yet durable, and the soft‑touch copper eases routing around tight corners, so you’ll finish wiring faster than you can say “bass boost.”
- Gauge:12 AWG
- Length:30 ft
- Conductors Material:Oxygen‑Free Copper (OFC)
- Rating (In‑Wall/Direct‑Burial):Outdoor‑rated (in‑wall/direct burial)
- Number of Conductors:1‑conductor (single pair)
- Color / Marking:Brown
- Additional Feature:Deoxidized copper surface
- Additional Feature:Soft‑touch true spec copper
- Additional Feature:Compact 30‑ft coil
FIRMERST 16/4 Outdoor Speaker Wire 100FT
If you’re setting up a patio sound system that needs to stay crystal‑clear even after a rainstorm, the FIRMERST 16/4 Outdoor Speaker Wire 100 FT is the go‑to choice. Its 16‑strand, 4‑wire design means you get four separate channels, each using oxygen‑free copper that cuts resistance, so you hear less loss and more punch. The direct‑burial rating lets you bury the cable up to 12 inches without fearing moisture; the fully filled jacket blocks water from both ends, keeping the signal dry. Aluminum foil shielding covers 100 % of the conductors, blocking over 99 % of EMI, which means your music stays clean despite nearby power lines. The waterproof connectors and UV‑resistant black jacket survive sun, rain, and snow, so you won’t need to replace them for years. At 100 ft, weighing 6.67 lb, you can span a large deck or multiple zones without splicing, and the 9.88 × 9.76 × 5.12 in. packaging fits nicely in a toolbox. In short, you get durability, signal fidelity, and easy installation—all without breaking the bank.
- Gauge:16 AWG (4‑conductor)
- Length:100 ft
- Conductors Material:Oxygen‑Free Copper (OFC)
- Rating (In‑Wall/Direct‑Burial):Direct burial, waterproof, shielded
- Number of Conductors:4‑conductor
- Color / Marking:Black (shielded)
- Additional Feature:Shielded aluminum foil
- Additional Feature:Waterproof connectors included
- Additional Feature:Four‑wire configuration
AWG Outdoor Speaker Wire 14/4 Gauge 50FT UV-Resistant
CL2 Burial Cable
Need 14‑4 gauge, 50‑foot roll of HiFind’s outdoor speaker wire hits the sweet spot for anyone who wants loud, clean sound without the crackle that usually shows up after a few hundred feet of cheap cable. You’ll get four color‑coded conductors—red, black, white, green—so polarity’s a breeze, and the 14AWG CCA strands (105 × 0.16 mm) carry higher power over longer runs, keeping bass tight and mids clear. The UV‑resistant LLDPE jacket and 420D ballistic fiber layer protect against sun, abrasion, and tensile stress, so you can bury it CL2‑rated, from –40 °F to 248 °F, without worries. It’s flexible, tangle‑resistant, and waterproof, making it perfect for home theater walls, patio PA systems, marine lighting, or trailer brakes, and the 2‑year warranty backs up its durability.
- Gauge:14 AWG (4‑conductor)
- Length:50 ft
- Conductors Material:Copper‑Clad Aluminum (CCA)
- Rating (In‑Wall/Direct‑Burial):CL2 (in‑wall/direct burial)
- Number of Conductors:4‑conductor
- Color / Marking:White (four‑color inner insulation)
- Additional Feature:4‑color inner insulation
- Additional Feature:420D ballistic fiber reinforcement
- Additional Feature:Two‑year warranty guarantee
Factors to Consider When Choosing Speaker Wire Outdoor
You’ll want a low‑gauge (12‑14 AWG) wire because its lower resistance keeps the signal strong over long runs, so your music stays punchy even 100 ft away. A UV‑resistant jacket and a CL2/CL3 direct‑burial rating protect the cable from sunlight and soil moisture, meaning you won’t have to replace it after a summer storm. Choose copper‑clad (OFC) for best conductivity, and look for a flexible, 7‑strand construction so you can route it around posts without kinking, while still holding up to the elements.
Gauge Resistance Rating and Gauge
A lower AWG number means a thicker conductor, so a 12‑AWG or 14‑AWG cable will have less resistance than a 16‑AWG line, which translates to less power loss, cooler operation, and a cleaner signal over long outdoor runs; for example, a 12‑AWG speaker wire can carry up to 30 amps with only about 0.0016 Ω per foot, while a 16‑AWG piece jumps to roughly 0.004 Ω per foot, meaning the same 100‑foot run would waste half the voltage if you pick the thinner gauge. When you choose 12 AWG or 14 AWG for a 200‑foot garden setup, you keep voltage drop under 3 % and heat well below dangerous levels, so your amps stay punchy. If you opt for 16 AWG, stick to under 50 feet and low‑power speakers to avoid dull sound. Multi‑strand designs with 42‑65 strands give you flexibility without changing the effective gauge, while OFC copper beats CCA aluminum in resistance, ensuring the rating you see on the spec sheet translates to real‑world clarity.
UV‑Resistant Jacket
Why bother with a UV‑resistant jacket? Because sunlight will melt the polymer, cause color fading, and make the cable crack, turning your patio setup into a fire‑hazard. A UV‑stabilized LLDPE jacket, rated for at least 2,000 hours of UV exposure, stays flexible, preventing brittleness that would otherwise break insulation. In real‑world terms, that means the wire can sit in direct sun for months without losing its protective barrier, so you won’t have to replace it every season. Look for a jacket labeled “UV‑rated UV m” or “UV‑resistant 1 mm thickness” – the numbers tell you how thick the shield is and how long it will last under harsh rays. This feature pairs well with CL2/CL3 ratings, ensuring the wire remains safe and sound even when exposed on a garden wall or deck.
Direct‑Burial Rating (CL2/CL3)
What sets a speaker wire apart for outdoor use is its direct‑burial rating—CL2 or CL3—because those numbers tell you the cable can sit underground or behind a wall without a protective conduit, saving you time and extra material. A CL2‑rated line meets fire‑safety standards for in‑wall use, resisting flame spread up to 750 °C, while CL3 pushes that limit to 850 °C, giving you a bigger safety margin if you run wire through a garage or basement. Both ratings demand moisture‑tight insulation and a UV‑stable jacket, so the cable won’t soak up water or crack under sun. When you pick a CL3‑rated speaker wire, you can bury it 12‑inch deep, avoid conduit, and still meet code, meaning fewer connections, lower cost, and peace of mind that the wire won’t short out after a rainstorm.
Conductivity Material (OFC vs CCA)
Choose OFC when you need the lowest resistance—about 0.017 Ω per foot for 16‑AWG—so the signal stays crisp over long outdoor runs, while CCA’s 0.028 Ω per foot adds noticeable loss after just 50 feet, meaning you’ll hear a slight drop in volume and bass punch. OFC’s pure copper core keeps voltage drop under 2 % on a 100‑foot run, preserving high‑frequency detail and dynamic range, whereas CCA’s aluminum core pushes the drop to 4 % and can dull treble. If you’re wiring a patio with a 30‑foot stretch, the difference is negligible and the cheaper CCA may suffice; but for a backyard theater spanning 80 feet, OFC’s lower resistance translates to louder, tighter sound, less distortion, and better power handling, especially with high‑power amplifiers.
Flexibility and Stranding Count
Ever notice how a cable that bends like a garden hose makes outdoor wiring a breeze? You’ll find that higher strand counts boost flexibility, so a 42‑strand or 65‑strand conductor slides around trees, fence posts, and tight conduit without kinking, letting you pull long runs quickly. Multi‑strand OFC conductors give smoother bends and lower resistance than solid copper or CCA, which means less signal loss and a cleaner sound at the farthest speaker. A thick, flexible jacket usually wraps these high‑strand wires, preventing tangles and easing pull‑through during installation, even when you’re burying the cable. The fine strand count paired with oxygen‑free copper balances durability, signal integrity, and maneuverability, letting you keep the music loud and crisp without wrestling with stiff, brittle wire.
Polarity Marking and Color Coding
Is the polarity on your outdoor speaker wire clearly marked, or are you guessing which conductor is positive? You’ll want a stripe, black line, or colored jacket that stays visible after months of sun and rain, because a clear mark prevents phase flips that ruin stereo imaging and cause one side to sound thin. Most manufacturers use red for the plus and black or white for the minus, so you can match the same colors across multiple runs and avoid mixing up conductors in a wall or buried trench. Look for cables with UV‑stable ink or molded ridges that survive 10 years of exposure, and verify that the markings stay legible after a 30‑day soak test. Consistent color coding cuts installation time, reduces errors, and keeps your outdoor system sounding full‑bodied and balanced.
Frequently Asked Questions
Can I Use Outdoor Speaker Wire for Indoor Home Theater Installations?
Yes, you can use outdoor speaker wire inside, but check the gauge—16 AWG works for short runs under 50 ft, while 12 AWG handles longer distances without loss. Outdoor cable’s UV‑resistant jacket adds durability, though it’s bulkier, so you may need extra conduit space. Its double‑insulated design reduces interference, keeping bass tight and highs clear, but the thicker insulation can make termination a bit trickier—just strip carefully and use proper connectors.
How Does Weather Resistance Affect Long‑Term Durability of Speaker Cable?
Weather resistance determines how long your speaker cable stays functional, because UV‑stable jackets prevent cracking, and moisture‑blocking layers stop corrosion, so a cable rated for UV °C – 85 °C with a 300 µm PVC outer sheath will outlast a cheap 200 µm one by 2‑3 years in rain‑prone zones. You’ll notice the difference when the insulation stays flexible after 5 years, keeping the copper core intact, which means consistent signal quality and no hiss, even after harsh winters.
Is There a Noticeable Audio Difference Between Copper‑Clad Aluminum and Solid Copper?
Like a thin thread versus a rope, copper‑clad aluminum sounds thinner, but its 0.3 Ω/100 ft resistance is higher than solid copper’s 0.017 Ω/100 ft, so you’ll notice a slight loss of high‑frequency sparkle over long runs. Solid copper keeps the signal tighter, delivering up to 3 dB more power to the speaker, which translates to clearer mids and less hiss. If you run under 50 ft, the difference is barely audible, but beyond 100 ft the gap widens noticeably.
Do I Need a Separate Ground Wire for Outdoor Speaker Installations?
You don’t need a separate ground wire for most outdoor speaker setups; the speaker’s chassis and the amplifier’s chassis already share the earth through the power‑ground of the source, so adding a dedicated ground usually won’t change sound quality. If you’re running long runs over 100 ft, use a two‑conductor cable with a copper‑clad aluminum core and a 16‑gauge gauge to keep resistance low, which prevents voltage drop and keeps volume consistent. Only in high‑power, metal‑enclosure installations might a ground strap reduce hum, but it’s rarely required.
Can I Splice Cl2‑Rated Wire Without Compromising Its Fire‑Rating?
You can splice CL2‑rated wire, but you must keep the splice within the same fire‑rating envelope, using UL‑listed heat‑shrink or soldered connectors rated for at least 600 V and 90 °C, and seal it with fire‑resistant tape; otherwise the joint could become a weak spot, letting heat concentrate and the the rating. A proper splice maintains the 90 °C limit, preserves the 600 V insulation, and keeps the cable safe for outdoor use.
